Copper Rod Casting Equipment

• Product:
  Copper Rod Casting Equipment
  
  
• Model Number:
  17mm
  
  
• Description:
  1.Upward  continuous casting machine for copper material (hereinafter referred to as  unit) for producing bright brass rod length
  2. main technical parameters
  2.1 Equipment Type:SYJ1017-I3
  2.2 Annual production capacity:5000tons
  2.3 Furnace structure:combined furnace of 3 parts(2 melting furnace and 1 insulting furnce)
  2.4 Number of casting rods:10
  2.5 Diameter of casting rod :17mm
  2.6 Upward going speeding : 0～800mm/min
  2.7 Annual working hours:7200hrs.
  2.8 Liquid level tracing precision: ±2mm
  2.9 Specification of coils: φ700mm×φ1600mm×1200mm
  2.10 Copper melting speed: 500kg/h
  2.11 Power consumption of copper melting: <350kwh/ton
  2.12 Winding mode: passive income line
  2.13 Take-wheel drive mode: copper rods to promote
  2.14 Material feeding mode:electric hoisting block for the feeding of whole lumps of electrolytic copper
  2.15 Diving mode of upward movement : AC slaver motor,transmission chain is a zero clearance synchronized tooth belt.
  2.16 Fixture mode of the upward going copper rod:manual fixure
  2.17
  Interface:
  data and automated record-keeping system for large-screen display of computer, servo motor controlled by a separate touch screen
  3 principle
  Unit will be frequency induction furnace by electrolytic copper melted into liquid, by covering the surface of the charcoal or graphite film and the air separation P (to avoid oxidation of
  copper solution) was holding furnace to control the copper liquid temperature 1150 ℃ ± 10 ℃, liquid copper continuous casting machine will mold quickly in the crystallization of a
  continuous production of copper rods, and finally received by the double-headed wire as auxiliary equipment plate filling into products.
  
  Learn more about products detailed description, pricing and service, Please send mail to us!