Copper Rod Casting Equipment, 17mm, Copper Rod Casting Machine, Continuous Casting Machine

1.Upward  continuous casting machine for copper material (hereinafter referred to as  unit) for producing bright brass rod length
2. main technical parameters
2.1 Equipment Type:SYJ1017-I3
2.2 Annual production capacity:5000tons
2.3 Furnace structure:combined furnace of 3 parts(2 melting furnace and 1 insulting furnce)
2.4 Number of casting rods:10
2.5 Diameter of casting rod :17mm
2.6 Upward going speeding : 0～800mm/min
2.7 Annual working hours:7200hrs.
2.8 Liquid level tracing precision: ±2mm
2.9 Specification of coils: φ700mm×φ1600mm×1200mm
2.10 Copper melting speed: 500kg/h
2.11 Power consumption of copper melting: <350kwh/ton
2.12 Winding mode: passive income line
2.13 Take-wheel drive mode: copper rods to promote
2.14 Material feeding mode:electric hoisting block for the feeding of whole lumps of electrolytic copper
2.15 Diving mode of upward movement : AC slaver motor,transmission chain is a zero clearance synchronized tooth belt.
2.16 Fixture mode of the upward going copper rod:manual fixure
2.17
Interface:
data and automated record-keeping system for large-screen display of computer, servo motor controlled by a separate touch screen
3 principle
Unit will be frequency induction furnace by electrolytic copper melted into liquid, by covering the surface of the charcoal or graphite film and the air separation P (to avoid oxidation of
copper solution) was holding furnace to control the copper liquid temperature 1150 ℃ ± 10 ℃, liquid copper continuous casting machine will mold quickly in the crystallization of a
continuous production of copper rods, and finally received by the double-headed wire as auxiliary equipment plate filling into products.